Lubricants & Adhesives – A1 Pressure Washers

500ml Adhesive Remover

Vikki Thorpe — Mon, 16 Jul 2018 14:39:35 +0000

Solvent Cleaner is a blend of ingredients designed to remove excess amounts of adhesive from a variety of surfaces. Its powerful action breaks down adhesives and dissolves them into a solution which can be easily removed.

The solution mixes readily with most organic materials. This makes it ideal for removing many forms of soiling resulting from spillages where grease or oil bases are part of the liquid spilt.

It is fast acting and goes to work instantly, penetrating and dispersing all unwanted substances. These substances once solubilised may simply be wiped away. The remaining solvent cleaner will then evaporate leaving no residue.

Directions For Use:

1. A small unobtrusive area should be tested for stability prior to undertaking the cleaning operation.

2. Spray directly onto affected area and allow to work.

3. Remove with a clean, dry cloth.

4. Alternatively spray onto cloth and wipe over affected area.

The post 500ml Adhesive Remover appeared first on A1 Pressure Washers.

600ml WD-40 Trade Size

Vikki Thorpe — Fri, 06 Jul 2018 15:00:51 +0000

Silicone-free.

With over 2000 known uses, WD-40 cleans, protects, displaces moisture, penetrates, lubricates, gets under dirt and grease, dissolves adhesives, dries electrical systems and eliminates moisture-induced short circuits.

Loosens rusted, frozen or stuck metal fastenings, holds firmly to all moving parts, corrosion-resistant, shields against moisture on bare metal.

It will not affect fabrics, rubbers or plastics.

The post 600ml WD-40 Trade Size appeared first on A1 Pressure Washers.

500ml Prefix Heavy Duty Adhesive Spray

Vikki Thorpe — Wed, 11 Oct 2017 15:06:45 +0000

Prefix is a multi purpose spray adhesive designed to perform a variety of bonding tasks.

Flooring – Particularly suitable for fixing foam and felt backed carpets, carpet tiles and underlays.

Upholstery – Ideal for bonding most upholstery materials to themselves and to each other including foams, fabrics and leather.

Automotive – For use in fitting vehicle interior carpets etc.

Not suitable for vehicle headlinings.

Directions:

Ensure that surfaces are clean, dry and dirt free.
For a strong bond spray a number of light coats onto both surfaces. For a lighter bond apply to one surface only.
Allow a few moments for the solvent to evaporate.
Press surfaces together firmly, working outwards to achieve a good bond.
When finished invert the can and spray for a few seconds to clear the nozzle.

The post 500ml Prefix Heavy Duty Adhesive Spray appeared first on A1 Pressure Washers.